Boonton 4500B Peak Power Meter Manual de usuario Pagina 345

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 372
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 344
Boonton 4500B RF Peak Power Analyzer
Maintenance
7-13
GPIB (IEEE-488) Bus Verification
Use the GPIB Controller and the Model 4500B to perform basic operations.
1. Connect the GPIB controller and the 4500B with a GPIB cable.
2. Press the Init system key and Init > Defaults > LOAD to put the 4500B in a known state.
3. Set the 4500B to use the SCPI language mode (instead of the 4500A emulation mode)
with the Util > Remote Conf > GPIB > Emulate 4500A > OFF menu selection.
4. Util > Remote Conf > GPIB > Bus Setup >
Address # menu. Choose a convenient number between 1 and 30 that will be unique to
the test instrument.
5. Press the CLR key to clear any pending errors.
6. Using the GPIB controller, send the command *IDN? to the Model 4500B. The REM
message should appear in the lower right display rectangle indicating that the Model
 the LSN message should appear when the command is
sent, indicating 
appear on the display.
7. Use the GPIB controller to read a string from the 4500B. A string similar to the
following should be returned:
Boonton Electronics,4500B,103,ver20051007
The s
software version number. The TLK message should appear indicating that the Model
4500B is in the talk mode.
8. Using the GPIB controller, send the command SYSTem:ERRor? The lower case letters
are optional. Use the GPIB controller to read a string from the 4500B. The following
should be received:
0, "No Error"
If there were an error, a non-zero code number and a short message would be received.
9. Press the Local system key. The REM message should disappear. If it does not, the GPIB


Vista de pagina 344
1 2 ... 340 341 342 343 344 345 346 347 348 349 350 ... 371 372

Comentarios a estos manuales

Sin comentarios