Boonton 4500B Peak Power Meter Manual de usuario descargar pdf (Pagina 260)

Boonton 4500B RF Peak Power Analyzer

Remote Operation

5-60

READ:ARRay:MARKer:POWer?

Description: Returns an array of the current marker measurements for the specified channel. The array consists

of the average, maximum, and minimum power and peak-to-average ratio between the two

markers, powers at both markers, and the ratio of the two markers. Note the peak-to-average ratio

and marker ratio are returned in dB for log units, and percent for linear units.

Syntax: READ[1|2|3|4|6|7]:ARRay:MARKer:POWer?

Returns: CC1, Pavg, CC2, Pmax, CC3, Pmin, CC4, PkToAvgRatio, CC5, Pwr@Marker1, CC6,

Pwr@Marker2, CC7, Mrk1/Mrk2 ratio



Valid Modes: Pulse and Modulated

READ:ARRay:MARKer:WINDow?

Description: Return the current marker window display contents, MK1, MK2 and marker math result. The

channel assignment(s), marker math function and basic units are the same as the display.

Syntax: READ:ARRay:MARKer:WINDow?

Returns: CC, MK1, MK2 and marker math display

Where CC is the measurement condition code.

Valid Modes: All

READ:CW:POWer?

Description: Return current average amplitude reading in channel units.

Syntax: READ[1|2|3|4|5|6|7]:CW:POWer?

Returns: CC, Average power (watts, dBm) or average voltage (volts, dBv)

Where CC is the measurement condition code.

Valid Modes: Modulated mode only.

READ:INTERval:AVERage?

Description: For the specified channel, return the average power or voltage between marker 1 and marker 2.

The units will be the same as the specified channel.

Syntax: READ[1|2|3|4|5|6|7]:INTERval:AVERage?

Returns: CC, average power or voltage between markers

Where CC is the measurement condition code.

Valid Modes: Pulse and Modulated

1 2 ... 255 256 257 258 259 260 261 262 263 264 265 ... 371 372

Sin comentarios

Boonton 4500B Peak Power Meter Manual de usuario Pagina 260