search

Boonton 4540 Peak Power Meter User Manual Manual de usuario Pagina 200

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 270
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 199
Boonton 4540 Series RF Power Meter
Remote Operation
5-66
STATus:QUEStionable:CONDition?
Description: Return the current value of the Questionable Condition register. The following table shows the
bit assignments in the register. These bits are updated by the instrument in real time, and can
change in response to changes in the instrument’s operating condition.
Bit Value Definition
0 1 Not used always 0.
2 2 Not used always 0.
3 8 Power 1 = a power measurement may be invalid.
4 16 Not used always 0.
5 32 Not used always 0.
6 64 Not used always 0.
7 128 Not used always 0.
8 256 Calibration 1 = sensor requires calibration and/or zeroing
9 512 Temperature 1 = sensor 1 temperature drift (see note below).
10 1024 Temperature 1 = sensor 2 temperature drift (see note below).
11 2048 Not used always 0.
12 4096 Not used always 0.
13 8192 Not used always 0.
14 16384 Not used always 0.
15 32768 Not used always 0.
Note: For temperature compensated sensors with Temp Comp
―On‖, warning occurs for greater than ±30 degrees C from
auto-cal temperature. For non-compensated sensors or Temp
Comp ―Off‖, warning occurs for greater than ±4 degrees C.
Syntax: STATus:QUEStionable:CONDition?
Returns: 16-bit register value (0 to 32767)
Valid Modes: Any
STATus:QUEStionable:ENABle
Description: Sets or returns the Questionable Enable register, which contains the bit mask that defines which
true conditions in the Questionable Status Event register will be reported in the Questionable
Summary bit of the instrument Status Byte. If any bit is 1 in the Questionable Enable register and
its corresponding Questionable Event bit is true, the Questionable Status summary bit will be set.
Syntax: STATus:QUEStionable:ENABle <numeric_value>
Argument: <numeric_value> = 0 to 32767
Valid Modes: Any
Vista de pagina 199
1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 269 270

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Instrumentos de medición Boonton 4540 Peak Power Meter User Manual
Instrumentos de medición Boonton Sensor Security Procedures Manual de usuario   (1 paginas)
Instrumentos de medición Boonton Average & CW Power Sensors Manual de usuario   (4 paginas)
Instrumentos de medición Boonton 52000 Series USB CW Power Sensor Manual de usuario   (68 paginas)
Instrumentos de medición Boonton The New 55 Series Wideband USB Power Sensor Manual de usuario   (28 paginas)
Instrumentos de medición Boonton 8201 Modulation Analyzer Quick Start Manual de usuario   (14 paginas)
Instrumentos de medición Boonton 4500B Peak Power Meter Manual de usuario   (372 paginas)
Instrumentos de medición Boonton 9240 RF Voltmeter Manual de usuario   (100 paginas)
Instrumentos de medición Boonton PIM 21 Quick Start Manual de usuario   (2 paginas)
Instrumentos de medición Boonton PIM 21 User Manual Manual de usuario   (31 paginas)
Instrumentos de medición Boonton PIM 31 Remote Control Manual de usuario   (5 paginas)
Instrumentos de medición Boonton PIM 31 Quick Start Manual de usuario   (6 paginas)
Instrumentos de medición Boonton PIM 31 User Manual Manual de usuario   (110 paginas)
  • Cables Direct Fulton Wireless & Spy Woolworths Celestion
  • Element Decodificadores de tv RCA Controles remotos GE Luces de trabajo Genie Vehículo De Utilidad Hunter Linternas
  • JBL On Stage Micro II Philips 349P7FUBEB/00 Laerdal Resusci Baby Samsung SR8730 Sony PRS-T2
  • Naxa NMV-149 Manual de usuario Samsung BD-J4500R Manual de usuario Electrolux ESL6360LO Manual de usuario Vinotemp VT122TS2Z El manual del propietario Beko WKL 60611 EM Manual de usuario