Boonton 4530 Peak Power Meter User Manual Manual de usuario descargar pdf (Pagina 88)

4-14

Chapter 4 Boonton Electronics

Remote Operation 4530 Series RF Power Meter

TKSDATA

Description: Returns the sensor data table from sensor’s EEPROM. Note that year codes are excess-

1990, that is 5 means 1995, and 11 means 2001. Power and attenuation levels are coded as

dBm x 100; that is, -3500 means -35.00 dBm. All other values are in fundamental units.

Model numbers are only shown as the base number - any special “S” version number will

not appear.

Syntax: TKSDATA?

Returns: numeric array < type, model#, build month, day, year, serial#, calibration month, day, year,

attenuation, impedance, min pwr, max pwr, CW min pwr, CW max pwr >

Valid Modes: All

Restrictions: SYSTem:LANGuage must be set to BOON to use native mode instructions

TKSSLOW

Description: Returns the low bandwidth frequency calfactor table from sensor’s EEPROM. Frequencies

are in GHz and the calfactors are in dB. Count is the total number of data items in the string

including the upper and lower frequency limits.

Syntax: TKSSLOW?

Returns: numeric array < Count, LowerFreq, UpperFreq, Freq0, CF0, Freq1, CF1, Freq2, CF2... FreqN,

CFn >

Valid Modes: All

Restrictions: SYSTem:LANGuage must be set to BOON to use native mode instructions

TKSFAST

Description: Returns the high bandwidth frequency calfactor table from sensor’s EEPROM. Frequen-

cies are in GHz and the calfactors are in dB. Count is the total number of data items in the

string including the upper and lower frequency limits.

Syntax: TKSFAST?

Returns: numeric array < Count, LowerFreq, UpperFreq, Freq0, CF0, Freq1, CF1, Freq2, CF2... FreqN,

CFn >

Valid Modes: All

Restrictions: SYSTem:LANGuage must be set to BOON to use native mode instructions

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 169 170

Sin comentarios

Boonton 4530 Peak Power Meter User Manual Manual de usuario Pagina 88