Boonton PIM 31 User Manual Manual de usuario descargar pdf (Pagina 100)

100

Number

Element

Description

Main Power supply

AC Supply: 90-264V, 750W / 750VA

use 90 deg connector only.

Fuse: 4A / 230V or 8A / 110V.

Main Power Switch

PIM31 contains protection circuitry to control

RF power during operation and during power

on/off cycles.

After switching Main Power Switch on, wait 2

seconds before pushing Front Power Button.

Fans may briefly run after power off.

Note: Do not use Main Power Switch while

system is in operation mode as vital files

may be corrupted. Always use the Front

Power Button to power the system down.

10 MHz Reference

out

10 MHz reference output to synchronize

external equipment.

Air Flow Fan

Always ensure sufficient air flow.

Air Flow Fan

Always ensure sufficient air flow.

Getting Started

(1) Powering Up:

PIM 31 test systems power up in a similar fashion to a desktop PC. However,

there is one exception: Significant RF power has to be controlled and managed.

For this reason, PIM 31 Series instruments contain a system to protect the

hardware and prevent unusual on / off cycles (such as 3 cycles per second).

When operated normally, the user will not be aware of these protective

measures.

• Briefly press the start button on the front panel.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 109 110

Sin comentarios

Boonton PIM 31 User Manual Manual de usuario Pagina 100