Boonton 9240 RF Voltmeter Manual de usuario descargar pdf (Pagina 77)

Boonton 9240 Series RF Voltmeter

STATus:OPERation:NTRansition

Description: Set or return the value of the negative transition filter bitmask for the Operation status group.

Setting a bit in the negative transition filter causes a 1 to 0 (negative) transition in the

corresponding bit of the Operation Condition register to cause a 1 to be written in the associated

bit of the Operation Event register.

Syntax: STATus:OPERation:NTRansition <numeric value>

Argument: <numeric value> = 0 to 65535

Returns: 16-bit register value (0 to 65535)

STATus:OPERation:PTRansition

Description: Set or return the value of the positive transition filter bitmask for the Operation status group.

Setting a bit in the positive transition filter causes a 0 to 1 (positive) transition in the

corresponding bit of the Operation Condition register to cause a 1 to be written in the associated

bit of the Operation Event register.

Syntax: STATus:OPERation:PTRansition <numeric value>

Argument: <numeric value> = 0 to 65535

Returns: 16-bit register value (0 to 65535)

STATus:PRESet

Description: Sets SCPI enable registers and transition filters to the default state. The Operational Enable and

Questionable Enable mask registers are both cleared so an SRQ will not be generated for these

conditions. All bits for the device and questionable calibration registers are enabled. All positive

transition filters are enabled and all negative transition filters are cleared.

Syntax: STATus:PRESet

Argument: None

Remote Operation

5-27

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 99 100

Sin comentarios

Boonton 9240 RF Voltmeter Manual de usuario Pagina 77